|
|
|
|
|
Large CNC Oil Country Lathes > > |
|
 |
| ITEM |
TNC-960 |
TNC-1060 |
TNC-1200 |
| Swing over bed |
960 mm (38") |
1060 mm (42") |
1200 mm (47") |
| Swing over cross slide |
560mm |
660mm |
800mm |
| Distance between centers |
2000(80"), 3000(120"), 4000(160"), 5000(200"), 6000(240") |
| Bed width |
560 mm (22") |
| Spindle nose |
A2-11
|
A2-15 |
A2-15 |
| Spindle bore |
Ø 156mm |
Ø 230mm |
Ø260 mm |
| Spindle speed (4stage) |
6-800 rpm |
4-600 rpm |
4-600 rpm |
| AC spindle motor |
22 KW / 30 KW (200"/240")
|
| Ball screw dia |
X-axis / Ø 40 x p8 Z-axis / Ø 63 x p10 Ø 80 x p10 (200"/240") |
| Cutting speed |
X-axis / 0~5 m/min Z-axis / 0~5 m/min |
| Max, x-axis travel |
600 mm |
| Max, z-axis travel |
1750(80"), 2750(120"), 3750(160"), 4750(200"), 5750(240") |
| Tailstock spindle travel / Quill |
300 mm / Ø 125 |
| Tailstock spindle taper |
MT-6 |
| Controller |
FAUNC 0iTD |
FAGOR 8055i |
| X-axis servo motor |
 12i |
FXM 54 |
| Motor Power (1:2 output) |
2.7 KW x 2 |
2.8 KW x 2 |
| Z-axis servo motor |
 22i |
FXM 74 |
| Motor Power (1:2 output) |
4.5KW x 2 |
5.3 KW x 2 |
| Coolant pump motor |
1 HP |
| Machine weight net (kgs) |
9500(80"), 10500(120"), 12500(160"), 14500(200"), 16500(240") |
| ITEM |
TNC-1200 |
TNC-1400 |
TNC-1600 |
| Swing over bed |
1200 mm (47") |
1200 mm (55")
|
1600 mm (63") |
| Swing over cross slide |
750 mm |
950 mm
|
1150 mm |
| Distance between centers |
2000(80"), 3000(120"), 4000(160"), 5000(200"), 6000(240") |
| Bed width |
800 (32") |
| Spindle nose |
A2-20 |
A2-20 |
A2-28 |
| Spindle bore |
Ø 310mm |
Ø 360mm |
Ø 535 mm |
| Spindle speed (4stage) |
3-400 rpm |
3-400 rpm |
2-300 rpm |
| AC spindle motor |
30 KW / 37 KW (200"/240")
|
| Ball screw dia |
X-axis / Ø 50 x p8 Z-axis / Ø 80 x p10 |
| Cutting speed |
X-axis / 0~5 m/min Z-axis / 0~5 m/min |
| Max, x-axis travel |
800 mm |
| Max, z-axis travel |
1750(80"), 2750(120"), 3750(160"), 4750(200"), 5750(240") |
| Tailstock spindle travel / Quill |
300 mm / Ø 200 / Ø 300 (OPT) |
| Tailstock spindle taper |
MT-7 |
| Controller |
FANUC OiTD |
FAGOR 8055i |
| X-axis servo motor |
30i |
FXM 75 |
| Motor Power (1:2 output) |
4.5 KW x 2 |
5.3 KW x 2 |
| Z-axis servo motor |
i 22 (4.5 KW) |
i 30 (4.5KW) |
| Motor Power (1:2 output) |
5.5KW x 2 |
6.5 KW x 2 |
| Coolant pump motor |
1 HP |
| Machine weight net (kgs) |
14000(80"), 17000(120"), 20000(160"), 23000(200"), 27000(240") |
|
|
|
|
| |
|
|
|
