| ITEM \ MODEL |
47 SERIES |
55 SERIES |
63 SERIES |
| Center high |
600 mm |
700 mm |
800 mm |
| Swing over bed |
1200 mm(38") |
1400 mm(42") |
1600 mm(46") |
| Swing over cross slide |
830 mm |
1030 mm |
1230 mm |
| Swing over gap |
1750 mm |
1950 mm |
2150 mm |
| Width of gap |
600 mm |
| Width of bed |
800 mm |
| Distance between centers |
2000(80"), 3000(120"), 4000(160"), 5000(200") ,
6000(240"), 7000(280"), 8000(320"), 9000(360") |
| Spindle bore |
Ø230mm |
Ø310mm |
Ø360mm |
Ø535mm |
| Spindle nose |
A2-15 |
A2-20 |
A2-20 |
A2-28 |
| Number of Spindle speeds |
6-400 |
4-300 |
3-250 |
2-150 |
| Tailstock spindle |
200 mm |
| Taper of center |
MT#7 |
| Quill travel |
300mm |
| Cross feeds |
0.065-0.96(48 Kinds) |
| Cross travel |
800mm |
| Compound rest travel |
350mm |
| Tool size |
50 x 50 |
| Longitudinal feeds |
0.13-1.92 (48 Kinds) |
| Lead screw diameter |
Ø50mm x 2TPI |
| Threading range, meteric |
2-30mm/Pitch (48 Kinds) |
| Threading range, inch |
1-15 TPI (48 Kinds) |
| Module pitch thread |
1-15M (32 Kinds) |
| DP. Pitch threads |
2-30P (48 Kinds) |
| Main spindle motor |
30HP (40HP, 50HP Optional) |
| Rapid motor |
1/2 HP |
| Coolant pump |
1/4 HP |
| Oil pump |
12W |
Specifications are subject to change without notice for further design improvement.
|
